Return to home page Docklands historical Project location work Technical information on structures Types of Bridges Galleries of School project work About the Bridges Project Main menu
 

Parts of many structures have to resist twisting, or torsion as it is correctly known. Torsion happens when the ends of a member are turned in opposite directions

plasticene twisting - torsion

Roll out your Blu-tak or plasticene again and hold both ends. Twist the ends in opposite directions and back again. If you pull at the same time and do this often enough the Blu-tak will thin out even more quickly then when simply pulled
Torsion can be very destructive. The Tacoma Narrows Bridge was destroyed by the twisting action created by high winds.

The destruction of the bridge in 1940 was filmed by Barney Elliott and Harbine Monroe.

Visit the Camera Shop website to find out more and view a short clip of the bridge collapse.

ballbutton.gif (367 bytes) Forces - Gravity ballbutton.gif (367 bytes) Forces - Compression
ballbutton.gif (367 bytes) Forces - Load ballbutton.gif (367 bytes) Forces - Tension
ballbutton.gif (367 bytes) Forces - Bending ballbutton.gif (367 bytes) Forces - Twisting

ballbutton.gif (367 bytes) Introduction ballbutton.gif (367 bytes) Shapes in structures
 
     
 
bdlogo 2.JPG (7624 bytes)
London Borough of Barking and Dagenham
Comments to Web Editor: devans@bardaglea.org.uk   
All contents © MM All rights reserved
 

Shapes in structures Forces - Twisting Forces - Bending Forces - Tension Forces - Compression Forces - Load Forces - Gravity Technical Menu Introduction